Journal of Siberian Federal University. Engineering & Technologies: Trace-Element Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS): a Case Study for Agates from Nowy Kościoł, Poland

Journal of Siberian Federal University. Engineering & Technologies / Trace-Element Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS): a Case Study for Agates from Nowy Kościoł, Poland

Full text (.pdf)

Issue: Journal of Siberian Federal University. Engineering & Technologies. 2009 2 (2)
Authors: Mockel, Robert; Götze, Jens; Sergeev, Sergey A.; Kapitonov, Igor N.; Adamskaya, Elena V.; Goltsin, Nikolay A.; Vennemann, Torsten
Contact information: Mockel, Robert 14 Brennhausgasse, Freiberg, D-09596 Germany; Götze, Jens 14 Brennhausgasse, Freiberg, D-09596 Germany; Sergeev, Sergey A. 74 Sredny Prospekt, St.-Petersburg, 199106 Russia; Kapitonov, Igor N. 74 Sredny Prospekt, St.-Petersburg, 199106 Russia; Adamskaya, Elena V. 74 Sredny Prospekt, St.-Petersburg, 199106 Russia; Goltsin, Nikolay A. 74 Sredny Prospekt, St.-Petersburg, 199106 Russia; Vennemann, Torsten UNIL-BFSH2, CH-1015 Lausanne, Switzerland
Keywords: agate; quartz; trace elements; LA-ICP-MS; oxygen isotopes; CL; Nowy Kościόł
Abstract: Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied to detect trace elements in agate from Permian volcanics (Nowy Kościoł, Poland) in low concentrations and with high spatial resolution. The used LA-ICP-MS system consists of a DUV 193 laser ablation system linked to a Thermo Finnigan Element 2 mass spectrometer. The use of a 193 nm ArF excimer laser (50-200 mJ energy output) and the standards NIST 611 and NIST 612 enables to produce and analyse small crater diameters down to 5 μm. Trace-element profiles have been analyzed for the elements Ti, Ge, Al, Fe, Mn, U, Th, Ba, Sr, Rb, Cs, and Y in the ppm- and sub-ppm level. The concentrations of the REE are sometimes below the detection limit of the method. Almost all elements (except Cu) display higher contents in chalcedony than in the macrocrystalline quartz. Fe, for instance, shows a 100 times higher concentration in agate bands compared to quartz, which may be due to finely distributed iron oxide particles in the chalcedony which probably act as colour pigments. The trace elements in agate are released simultaneously with Si during alteration of the surrounding volcanic rocks. Oxygen isotope data indicate that silica accumulation and agate formation took place at temperatures below 120°C. The characteristic trace-element distribution patterns in agate result from a self-purification process during crystallization of chalcedony and quartz from a silica gel.
Pages: 123-138
Paper at repository of SibFU: https://elib.sfu-kras.ru/handle/2311/1282

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).