- Issue
- Journal of Siberian Federal University. Engineering & Technologies. 2009 2 (2)
- Authors
- Biront, Vitaly S.; Drozdova, Tatyana N.; Blohin, Ivan V.; Lyndina, Elena N.; Yakimov, Igor S.; Ponomareva, Svetlana V.; Gusev, Alexander O.; Simakov, Dmitry A.
- Contact information
- Biront, Vitaly S. 79 Svobodny, Krasnoyarsk, 660041 Russia ; Drozdova, Tatyana N. 79 Svobodny, Krasnoyarsk, 660041 Russia; Blohin, Ivan V. 79 Svobodny, Krasnoyarsk, 660041 Russia; Lyndina, Elena N. 79 Svobodny, Krasnoyarsk, 660041 Russia; Yakimov, Igor S. 79 Svobodny, Krasnoyarsk, 660041 Russia; Ponomareva, Svetlana V. 79 Svobodny, Krasnoyarsk, 660041 Russia; Gusev, Alexander O. 37 Pogranichnikov st., Krasnoyarsk, 660111 Russia; Simakov, Dmitry A. 37 Pogranichnikov st., Krasnoyarsk, 660111 Russia
- Keywords
- The iron-nickel-cobalt system; oxides; oxidation annealing; phase transitions; the conditions of oxidation
- Abstract
The article deals with characteristics of oxidation of three-component alloy of the Fe - Ni - Co system. We demonstrate that the oxides composition is determined by the chemical composition of alloys primarily. To a lesser extent, oxides composition depends on the temperature-time profiles of oxidative treatment. Identified alloys composition and of oxidation Technology its, to obtain in the composition of oxides 97.5% oxide type NiFe2O4. It has been shown that the presence of cobalt in the alloys, within the investigated area of the alloy, decreases the likelihood of forming of nickel oxide NiO. This nickel in the alloys composed mainly spent on formation with iron oxide and cobalt-type NiFe2O4, NiCo2O4 and some others.
- Pages
- 139-150
- Paper at repository of SibFU
- https://elib.sfu-kras.ru/handle/2311/1286
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).