Journal of Siberian Federal University. Engineering & Technologies / Development of a Method for Monitoring the Process of Heating the Lining of High-Temperature Units

Full text (.pdf)
Issue
Journal of Siberian Federal University. Engineering & Technologies. 2020 13 (4)
Authors
Prikhodko, Evgeniy V.
Contact information
Prikhodko, Evgeniy V.: Pavlodar State University named after S. Toraigyrov Pavlodar, Kazakhstan;
Keywords
lining; heating of high-temperature units; temperature control; four-point explicit difference scheme
Abstract

This article proposes a new method for monitoring the thermal state of the lining of hightemperature units. Firstly, it is shown that the main methods for monitoring the thermal state of the lining are limited to obtaining data to prevent an emergency situation – leakage of the working medium through the lining and does not allow to obtain data on the temperature distribution over the cross section of the lining, for monitoring nonstationary thermal processes. Secondly, a method for determining the thermal state of the lining of a thermal unit is proposed, which allows one to obtain data on the temperature fields of the lining in the process of nonstationary heat conduction and use these values to control the process. Thirdly, to test the developed method, a physical model of the process of heating the lining of a high-temperature unit was created. Fourth, testing the physical model of the heating process showed that the developed method can be applied in practice, since its error does not exceed 10%

Pages
462-472
DOI
10.17516/1999-494X-0233
Paper at repository of SibFU
https://elib.sfu-kras.ru/handle/2311/135341

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).