Journal of Siberian Federal University. Engineering & Technologies / The Effect of Vulcanization Accelerator on the Properties of Porous Rubber

Full text (.pdf)
Issue
Journal of Siberian Federal University. Engineering & Technologies. 2021 14 (2)
Authors
Zhansakova, Kymbat S.; Russkikh, Gregory S.; Eremin, Evgeny N.
Contact information
Zhansakova, Kymbat S.: Omsk State Technical University Omsk, Russian Federation; ; Russkikh, Gregory S.: Omsk State Technical University Omsk, Russian Federation; Eremin, Evgeny N.: Omsk State Technical University Omsk, Russian Federation
Keywords
vulcanization; rubber; porophore; vulcanization accelerator; sulfenamide C; pore formation
Abstract

This work is devoted to identifying the patterns of influence of the vulcanization accelerator N-cyclohexyl-benzothiazyl-sulfenamide (CBS) on the technological, physico-mechanical, and thermo-physical properties of vulcanizates based on styrene-butadiene rubber. It was found that a decrease in the content of the vulcanization accelerator decreases the maximum torque, and a noticeably longer time is required for optimum vulcanization in the absence of CBS. The thermal conductivity in vulcanizates increases with a decrease in the accelerator concentration due to changes in the structure and molecular mobility of kinetic units. Physico-mechanical indicators increase with a decrease in the concentration of CBS, this is due to a decrease in the apparent density of porous rubbers

Pages
215-221
DOI
10.17516/1999-494X-0302
Paper at repository of SibFU
https://elib.sfu-kras.ru/handle/2311/139967

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).