- Issue
- Journal of Siberian Federal University. Engineering & Technologies. 2022 15 (1)
- Authors
- Shcherbakov, Igor N.
- Contact information
- Shcherbakov, Igor N.: Don State Technical University Rostov-on-Don, Russian Federation;
- Keywords
- modeling; friction coefficient; linear wear rate; composite coatings; modifiers; tribological system
- Abstract
The article considers the issues of choosing some modifiers of composite nickel-phosphorus coatings (CNiPC) using the method of crystal-chemical design in order to create high reliability and durability in the friction units of machines and mechanisms of tribological systems (TS). The paper shows the possibility of improving the tribological and anti-corrosion properties of NiP coatings without modifiers by introducing modifying additives into the coatings – ultradisperse powders of simple and complex metal oxides, oxides with corundum and rutile structures, simple substances with magnesium and tungsten structures, and polytetrafluoroethylene
- Pages
- 80–87
- DOI
- 10.17516/1999-494X-0375
- Paper at repository of SibFU
- https://elib.sfu-kras.ru/handle/2311/145388
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).