Siberian Federal University 
- Issue
- Journal of Siberian Federal University. Engineering & Technologies. 2023 16 (8)
- Authors
- Vasil’ev, Evgeniy N.; Emel’yanov, Dmitriy P.; Nesterov, Denis A.
- Contact information
- Vasil’ev, Evgeniy N. : Institute of Computational Modelling SB RAS Krasnoyarsk, Russian Federation; ; Emel’yanov, Dmitriy P.: Institute of Computational Modelling SB RAS Krasnoyarsk, Russian Federation; Nesterov, Denis A. : Institute of Computational Modelling SB RAS Krasnoyarsk, Russian Federation
- Keywords
- two-phase thermosyphon; heat flow; thermal resistance; angle of inclination
- Abstract
Experimental studies of the heat transfer capacity of two- phase thermosiphons filled with Freon 134A have been carried out. Thermosyphons are made of stainless steel, have a length of 400 mm and an internal diameter of 10.5 mm, the length of the evaporation zone was 200 mm, and the length of the condenser was 60 mm.The data of measurements of the temperature state and heat transfer characteristics of thermosiphons depending on the transferred heat flux, the angle of inclination from the vertical and the temperature of the coolant of the heat removal system are given
- Pages
- 904–911
- EDN
- QILHGR
- Paper at repository of SibFU
- https://elib.sfu-kras.ru/handle/2311/152315
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).