Siberian Federal University

Issue

Journal of Siberian Federal University. Engineering & Technologies. 2025 18 (6)

Authors

Shebeleva, Anna A.; Minakov, Andrey V.; Pryazhnikov, Andrey I.

Contact information

Shebeleva, Anna A.: Siberian Federal University Krasnoyarsk, Russian Federation; ; Minakov, Andrey V. : Siberian Federal University Krasnoyarsk, Russian Federation; Pryazhnikov, Andrey I.: Siberian Federal University Krasnoyarsk, Russian Federation

Keywords

enhanced oil recovery methods; microfluidic technologies; droplet generators; emulsion generation

Abstract

The work presents the results of experimental studies aimed at developing methods and conditions for emulsion formation using a microfluidic chip. To establish a regime map for the generation of stable emulsions, a wide range of inlet pressure values for both the continuous (aqueous) and dispersed hydrocarbon phases was systematically tested. Emulsions were produced both without the use of an emulsifier and with the addition of 0,5 wt% of the surfactant polysorbate 80 to the aqueous phase. It was demonstrated that incorporation of polysorbate 80 significantly reduces coalescence of hydrocarbon phase droplets, thereby promoting the formation of stable emulsions. Hydrophilization of the microfluidic chip channel walls was carried out via plasma surface activation followed by treatment with polyvinyl alcohol. This modification in surface wettability markedly improved the conditions for generating stable emulsions with a near-monodisperse droplet size distribution. As a result of systematic experiments, the pressure ranges in which such emulsions are formed were identified. Surface hydrophilization was found to significantly expand the parameter range for the generation of stable emulsions

Pages

714–727

EDN

RHXYNV

Paper at repository of SibFU

https://elib.sfu-kras.ru/handle/2311/157354

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).