Siberian Federal University

Issue

Journal of Siberian Federal University. Engineering & Technologies. 2016 9 (6)

Authors

Golubev, Matvey V.; Tretiyakov, Yaroslav A.; Bezrukikh, Aleksandr I.; Iliin, Aleksey A.; Klyuchantsev, Andrey B.

Contact information

Golubev, Matvey V.:«RUSAL ETC» LLC 37/1 Pogranichnikov, Krasnoyarsk, 660111, Russia; Tretiyakov, Yaroslav A.:«RUSAL ETC» LLC 37/1 Pogranichnikov, Krasnoyarsk, 660111, Russia; Bezrukikh, Aleksandr I.:Siberian Federal University 79 Svobodny Krasnoyarsk, 660041, Russia; E-mail: ; Iliin, Aleksey A.:«RUSAL ETC» LLC 37/1 Pogranichnikov, Krasnoyarsk, 660111, Russia; Klyuchantsev, Andrey B.:«RUSAL ETC» LLC 37/1 Pogranichnikov, Krasnoyarsk, 660111, Russia

Keywords

Soderberg’s cell; anode; cooling fins; computer modeling; cell’s temperature fields

Abstract

Soderberg’s cell there is the problem of overheating of the anode paste and increasing mass of the bakedome in the center of the anode and low temperatures (down to freezing in winter) in the periphery. Increasing the height of the bakedome in the central part affects the formation of the anode and consequently on the physical and mechanical properties of the anode, increasing the porosity, electrical resistance and reducing mechanical strength [1]. This paper presents the simulation results of cell’s temperature fields (S8-BM) with anode’s cooling fins

Pages

880-886

Paper at repository of SibFU

https://elib.sfu-kras.ru/handle/2311/21035

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).