Journal of Siberian Federal University. Engineering & Technologies / Trace-Element Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS): a Case Study for Agates from Nowy Kościoł, Poland

Full text (.pdf)
Issue
Journal of Siberian Federal University. Engineering & Technologies. 2012 5 (1)
Authors
Möckel, Robert; Götze, Jens; Sergeev, Sergey A.; Kapitonov, Igor N.; Adamskaya, Elena V.; Goltsin, Nikolay A.; Vennemann, Torsten
Contact information
Möckel, Robert : TU Bergakademie Freiberg, Institute of Mineralogy , 14 Brennhausgasse, D-09596 Freiberg, Germany; Götze, Jens : TU Bergakademie Freiberg, Institute of Mineralogy , 14 Brennhausgasse, D-09596 Freiberg, Germany; Sergeev, Sergey A. : A.P. Karpinsky All Russian Geological Research Institute (VSEGEI) , 74 Sredny Prospekt, St.-Petersburg 199106, Russia , e-mail: ; Kapitonov, Igor N. : A.P. Karpinsky All Russian Geological Research Institute (VSEGEI) , 74 Sredny Prospekt, St.-Petersburg 199106, Russia; Adamskaya, Elena V. : A.P. Karpinsky All Russian Geological Research Institute (VSEGEI) , 74 Sredny Prospekt, St.-Petersburg 199106, Russia; Goltsin, Nikolay A. : A.P. Karpinsky All Russian Geological Research Institute (VSEGEI) , 74 Sredny Prospekt, St.-Petersburg 199106, Russia; Vennemann, Torsten : Institut de Minéralogie et Géochimie, Université de Lausanne , UNIL-BFSH2, CH-1015 Lausanne, Switzerland
Keywords
agate; quartz; trace elements; LA-ICP-MS; oxygen isotopes; CL; Nowy Kościόł; LA-ICP-MS; CL
Abstract

trace elements in agate from Permian volcanics (Nowy Kościoł, Poland) in low concentrations and with high spatial resolution. The used LA-ICP-MS system consists of a DUV 193 laser ablation system linked to a Thermo Finnigan Element 2 mass spectrometer. The use of a 193 nm ArF excimer laser (50-200 mJ energy output) and the standards NIST 611 and NIST 612 enables to produce and analyse small crater diameters down to 5 μm. Trace-element profiles have been analyzed for the elements Ti, Ge, Al, Fe, Mn, U, Th, Ba, Sr, Rb, Cs, and Y in the ppm- and sub-ppm level. The concentrations of the REE are sometimes below the detection limit of the method. Almost all elements (except Cu) display higher contents in chalcedony than in the macrocrystalline quartz. Fe, for instance, shows a 100 times higher concentration in agate bands compared to quartz, which may be due to finely distributed iron oxide particles in the chalcedony which probably act as colour pigments. The trace elements in agate are released simultaneously with Si during alteration of the surrounding volcanic rocks. Oxygen isotope data indicate that silica accumulation and agate formation took place at temperatures below 120°C. The characteristic trace-element distribution patterns in agate result from a self-purification process during crystallization of chalcedony and quartz from a silica gel.

Pages
3-18
Paper at repository of SibFU
https://elib.sfu-kras.ru/handle/2311/2881

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).