- Issue
- Journal of Siberian Federal University. Engineering & Technologies. 2018 11 (5)
- Authors
- Shcherba, Victor E.; Shalai, Victor V.; Grigor’yev, Aleksandr V.; Bazhenov, Aleksey M.; Kondyurin, Aleksey Yu.
- Contact information
- Shcherba, Victor E.: Omsk State Technical University 11 Mira Str., Omsk, 644050, Russia; ; Shalai, Victor V.: Omsk State Technical University 11 Mira Str., Omsk, 644050, Russia; Grigor’yev, Aleksandr V.: Omsk State Technical University 11 Mira Str., Omsk, 644050, Russia; Bazhenov, Aleksey M.: Omsk State Technical University 11 Mira Str., Omsk, 644050, Russia; Kondyurin, Aleksey Yu.: Omsk State Technical University 11 Mira Str., Omsk, 644050, Russia
- Keywords
- pump; compressor; hybrid machine
- Abstract
The paper presents the results of experimental and theoretical studies of a piston hybrid power machine with a slotted seal of a stepped type. A mathematical model of the working processes of the machine running in the pump section is presented. The analysis of the infl uence of the discharge pressure in the pump section on the characteristics of a piston hybrid power machine with a slotted seal of a stepped type that allowed to prove the effi ciency of using a staged slit seal in the PGPM in comparison with a smooth seal, and also to determine the optimum operation of the PGPM at a discharge pump pressure in the interval 3-4 bar
- Pages
- 591-603
- Paper at repository of SibFU
- https://elib.sfu-kras.ru/handle/2311/71594
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).