Journal of Siberian Federal University. Engineering & Technologies / Analysis of Energy and Power Parameters on the Extruding of Copper Installation Conform with Prechamber

Full text (.pdf)
Issue
Journal of Siberian Federal University. Engineering & Technologies. 2018 11 (4)
Authors
Gorokhov, Yuriy V.; Belyaev, Sergey V.; Gubanov, Ivan Yu.; Uskov, Igor V.; Ivanov, Alexandr G.
Contact information
Gorokhov, Yuriy V.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; ; Belyaev, Sergey V.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Gubanov, Ivan Yu.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Uskov, Igor V.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Ivanov, Alexandr G.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia
Keywords
Conform machine; pre-chamber; continuous extrusion; energy-power calculation; the active friction
Abstract

The object of the calculation served as a real process of continuous extrusion of copper profiles on the installation Conform equipped with a set of pressing tool prechamber at the factory for processing non-ferrous metals in the city of Kamensk-Uralsk. To calculate the length of the split container, which should provide on its moving surface friction force sufficient to extrude the metal from the forehearth in a point matrix, the torque on the drive wheel and the electric motor power, used a methodology based on the determination of the total compression force, which was proposed by I.L. Perlin. These equations are characterized by simplicity and ease of use in technical and technological design of the metal extrusion process method Conform with prechamber

Pages
481-487
Paper at repository of SibFU
https://elib.sfu-kras.ru/handle/2311/71649

Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).