Siberian Federal University

Issue

Journal of Siberian Federal University. Engineering & Technologies. 2017 10 (5)

Authors

Mikhalev, Yuri G.; Polyakov, Peter V.; Yasinskiy, Andrey S.; Shahrai, Sergey G.; Bezrukikh, Aleksandr I.; Zavadyak, Andrey V.

Contact information

Mikhalev, Yuri G.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; ; Polyakov, Peter V.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; ; Yasinskiy, Andrey S.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Shahrai, Sergey G.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Bezrukikh, Alexandr I.: Siberian Federal University 79 Svobodny, Krasnoyarsk, 660041, Russia; Zavadyak, Andrey V.: «RUSAL ETC» LTD 37/1 Pogranichnikov Str., Krasnoyarsk, 660111, Russia

Keywords

anode; malfunction; spike; carbon dust; current efficiency; bath

Abstract

One of the most common anodes malfunctions appearing after its set up is uneven anode’s profile relief modification and protrusion formation, called “spikes”, “mushrooms” “deformations” and “cones”. Spikes can provide short circuits between anode and cathode, increase current fluctuations, carbon dust volume and noise. Another kind of anodes malfunctions is cracking due to thermal shock, which strikes “cold” anode during its setup. Pieces, formed as a result, fall into bath, make a technological malfunction, increase carbon consumption and make cell operating more difficult. One of the dangers of spikes formation is decrease of current efficiency and aluminium production economical and technical indices. An overview of Russian and foreign author’s anodes malfunctions causes researches are presented in the paper

Pages

593-606

Paper at repository of SibFU

https://elib.sfu-kras.ru/handle/2311/33852

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).